A training slide zooms in on a panel latch. From the crop alone, a new operator cannot tell which of the two latches to inspect. Put the overview beside the detail and mark the link between them.

Make the wide view do the locating

Use a view of the whole panel and mark the lower-right latch with a high-contrast box. Leave the nearby screw or another fixed landmark visible. Label the marker “Lower-right latch” so it can be recognized without relying on color alone.

The wide example panel has a locator box around the lower-right latch.

Illustrated overview. Give viewers an orientation landmark as well as a location marker.

Keep a matching landmark in the inset

Crop a larger view of the same area. Include the screw that appears beside the marked latch in the overview. Place the inset close enough for the connector or matching label to read as one relationship. If you rotate the crop, label the change in orientation.

A close-up inset shows the same latch and an adjacent screw that connects it to the wide view.

Illustrated detail. Keep one matching landmark so the reader can verify which part is enlarged.

Export the slide and look at it at the size your audience will see. From the wide view, find the same latch in the inset and then locate it back on the whole panel. If the connector crosses several parts, move the inset or use a matching marker.