Order 100 two-sided reading cards at 100 × 150 mm finished. State how the two sides should line up when the card is turned. Agree on the stock and finish with the shop.

Separate the file requirements from the physical job

Name the artwork revision, for example Reading-card-v03.pdf. Ask for the shop’s bleed, safe area, color and page-order requirements. Reference the template revision if it supplies one.

The measurement arrows mark the finished trim size of the reading card.

Illustrated fictional job. Bleed may extend beyond the trim.

Assign an approver for the proof

Check finished dimensions, both sides and orientation on the proof before approving the run. Make sure the approval names the same file and revision the printer will use.

The handoff pairs the artwork filename with a front-and-back proof check.

Illustrated preflight note for the printer and approver.

Iowa State University printing guidance