A 10 m diagonal brace in a drawing rises at 60 degrees above horizontal. To estimate its footprint, calculate the horizontal run, the side next to the measured angle.
Check the angle reference before calculating
Put the sloped length in A2 and the angle measured from horizontal in B2. This example uses degrees and an angle between 0 and 90. Spreadsheet COS takes radians, so convert the angle first:
=A2*COS(RADIANS(B2))
Illustrated geometry. Use the angle from horizontal.
Try a flat segment and a steep one
With 10 m and 60°, the run is 5 m. With 0°, it is the full 10 m. At 90°, it is zero in the geometry, although the sheet may show a tiny residual from floating-point math. If the source measures from vertical, use its complementary angle before applying this formula.

Illustrated boundary check. A flat segment has its full length along the baseline.
Use the same unit for the result as the input length. Use a measured drawing when a physical fit depends on the dimensions.



