Two doors have signs with the same event name. Only the west entrance sign points visitors the wrong way. A replacement note needs a physical identifier so the installer swaps the intended copy.

Give the installer a location and revision

Write “West entrance, exterior frame beside the double doors.” Name the outgoing copy, rev 2, left arrow, and the replacement, rev 3, right arrow. Attach the artwork and specify who is authorized to remove the old copy. Mark the separate lobby sign as outside this request.

A site sketch locates the west entrance sign and shows the lobby sign as a separate item.

Illustrated replacement scope. Identify the mounting location as well as the wording.

Check the installed direction from the approach

Ask the installer to record the location and revision after installation. From the west entrance approach, verify that the right arrow leads to the intended route. Compare the installed sign with the revision 3 proof and confirm the lobby sign is still in place.

The replacement proof reads West entrance, revision 3, arrow right.

Illustrated closeout. Check the arrow from the approach used by visitors.

Close the request with the check time and the name of the person who verified the sign. Remove superseded artwork from the current print folder so it does not come back during the next run.