Twelve seats face the demonstration table. Eight seats in islands make small-group discussion easier. To compare the options on one slide, duplicate the room before you move any furniture.

Lock the walls and doorway

Draw one schematic for the 8 m × 6 m room. Set the outline in a 4:3 ratio, place the door at the lower left and duplicate the plan at the same size. Keep the same orientation and chair symbol in both panels.

Identical room outlines show three rows of four chairs on the left and two groups of four chairs on the right.

Illustrated comparison. Use matching chair symbols and room dimensions.

Make the trade-off visible

In the left panel, place three rows of four chairs and label the option 12 seats · faces front. On the right, use two groups of four with the label 8 seats · group discussion. Check that the doors line up before exporting the slide.

The lower-left door aligns in both layouts and the seating trade-off is labeled below.

Illustrated alignment check. The wall and door landmarks stay fixed while seating changes.

Ask someone to point to the entrance in both plans, count the seats and explain the trade-off. Label the drawing schematic. Use a measured layout when you need to check physical clearances.