The exhibit crew has one large PDF floor plan and a printer loaded with smaller paper. Tiling splits the plan across sheets. The important proof is the seam where a route crosses between two tiles.

Set the scale before counting tiles

Open Print in Acrobat. Choose the printer, paper and page you actually need. In Page Sizing & Handling, choose Poster. Set Tile Scale to 100% if the original dimensions matter. Start with an overlap such as 10 mm where the printer and assembly method allow it, then inspect the preview and its tile count. Enable cut marks if you will trim the joins.

A poster tiling example shows a route crossing adjacent print tiles and an overlap band.

Illustrated tile layout. Read the actual tile count in Acrobat’s preview.

Proof the join where the route crosses

On the test print, lay adjacent sheets together and align a detail visible on both, such as the blue route crossing the lobby. Check that the route is continuous before trimming. If the plan has a 100 mm reference bar, measure it on paper. A correct seam and a correct scale are separate checks.

Two overlapping paper tiles line up at the same route segment, with a marked 100 mm check bar.

Example proof. Align the shared content, then measure the known reference if scale matters.

If a label falls in a printer margin, return to the preview with the correct printer and paper selected. Adjust the layout and recheck the affected edge before using the assembled map.

Adobe’s Poster printing guide.