The printer wants an A6 postcard with 3 mm of bleed on every edge. The PDF can have the right page boxes while the background still stops exactly at the cut. Check the boxes and the artwork as separate parts of the proof.
Identify the cut line and the extra area
In Acrobat Pro, open Use print production > Output preview and enable Show Art, Trim, & Bleed Boxes. Identify the trim boundary for the finished 105 × 148 mm card. In this example the printer requires 3 mm beyond that line on each side. Compare with the actual job specification before approving your own PDF.

Example job specification. Use the printer’s actual dimensions for your own proof.
Inspect the artwork at each edge
Zoom in on a corner where the design is supposed to run to the edge. Follow the background past the trim line and out to the required bleed. A white strip beyond the cut is a clue that the background stopped early. Check a nearby label separately against the printer’s safe margin.

Example edge check. The bleed box can be present even when the artwork stops early.
If the artwork stops at trim, extend it in the design source and export a fresh PDF. Reopen that file and repeat the edge check on each page that uses full bleed.



