For a desk-lamp comparison, make one entry per run. Label this fictional example Run 014 — lamp comparison.

Write the repeatable conditions

Record the time, the lamp IDs, a sensor distance of 30 cm, and whether the room lights were on. Write the measurement unit, lux. Link the original readings with [Raw readings](data/run-014.csv) and record the actual number of readings you took.

The lamp experiment note records the measure in lux and the sensor distance.

Illustrated setup note. Write down conditions someone else would need to repeat.

Explain a change before interpreting the result

If a window blind opened before reading two, write that in Deviations so another reader can understand the conditions. Open the data link from the saved note and look for the distance and unit. Keep the observations intact when you add a later interpretation.

The run entry links to its raw CSV and records a change to the window blind.

Illustrated traceability check. Keep observations and interpretations separate.

NIEHS guidance for laboratory notebooks